(iOS / iPadOS) I want to distribute APN settings for cellular model devices from the MDM
You can upload the configuration profile published by each carrier as is, and then save and distribute it.
Open the creation screen from CONFIG>Profile in the admin console.
Select Enable configuration profile upload, and then select the target configuration profile from File.
Because you do not need to enter each setting value manually, you can prevent input errors and create the profile with fewer operations.
If you need to enter setting values directly,
you can configure the required values from CONFIG > Profile > Cellular payload and distribute them.
For details on the setting values, check directly with each carrier.
Last updated: December 23, 2021