Deployment flow using per-device authentication for Windows

This page explains the deployment method using per-device authentication for people who are new to BizMobile Go!, are about to start preparing device setup (kitting), or are taking over management of devices already in operation.

In this method, you prepare device information individually in advance. Each device enrolls (checks in) to the MDM using the method you prepared for it (an individual provisioning package, Key / Code, and so on).

This page explains, in order, the basic steps common to device management and the deployment method for per-device authentication. You can also read only the parts that apply to you.

Use it to find the procedures required for your use case.

Task and link to the manual		Where to work		Frequency
		BizMobile Go! admin console	Managed device	First time	As needed
1. Set up management groups	1) Create a template	Yes		Yes	Yes *1
2. Set up content distribution	2) Register profiles	Yes		Yes	Yes *1
	3) Register apps (in-house apps)	Yes		Yes	Yes *1
3. Create device information	4) Create management information for the devices to enroll	Yes		Yes	Yes *2
4. Enroll devices	5) Check in to enroll the device		Yes	Yes	Yes *2

*1 When a management group is added or changed

*2 When a device is added