Set Up Device Owner Mode and Enroll Using a BizMobile ID on Android
The final step in making a device manageable is to enroll it. When enrollment is complete, the device is registered in BizMobile Go! as an MDM device and can be managed.
To enroll a device, reset it, follow the procedure to set up Device Owner mode, and then enter the Key/Code when the BizMobile Go! MDM agent app appears.
When enrollment is complete and the device is registered in BizMobile Go!, the profiles, apps, and other items registered in the device's template are distributed to the device, completing device setup (kitting) automatically.
When you set up a Google account after resetting the device, enter the BizMobile ID and continue. The BizGo! MDM agent app (ver. 2.0 or later) is then installed, and you can set Device Owner mode manually.
Note: The displayed screens may differ depending on the model and OS version.
| Step | Description | Screen |
|---|---|---|
| 1 | Prepare a device that runs Android 6.0 or later and has not been activated. If the device is already in use, reset it. Make sure the battery level of the device you are setting up is 90% or higher. When the device is encrypted (described later), the battery level must be 90% or higher and the device must be connected to a power source. |  |
| 2 | On the Wi-Fi network selection screen, select the network to use and connect to it. |  |
| 3 | On the Google sign-in screen, enter afw#bizmobile in the email or phone number field and tap Next. |  |
| 4 | Tap Next. |  |
| 5 | Tap Next. |  |
| 6 | The download starts. |  |
| 7 | Install the BizGo! MDM Agent app. Tap Install. |  |
| 8 | The download starts. |  |
| 9 | Tap Encrypt. |  |
| 10 | Tap Encrypt phone. |  |
| 11 | When you tap Encrypt phone, the encryption process starts. |  |
| 12 | When encryption is complete, the Welcome start page appears again. Start the setup. (Note: Depending on the device, this screen may be skipped. In that case, go to step 13.) |  |
| 13 | Tap Set up. |  |
| 14 | Accept that the administrator will also manage the items associated with the profile. Tap [OK]. |  |
| 15 | The Welcome to BizMobile Go! page opens, and the screen is locked to this page until device enrollment is complete. Tap Next to proceed with device enrollment. |  |
| 16 | Enter Key=(enrollment key) and Code=(enrollment code) from the device information created in the BizMobile Go! admin console, select Japan from Region, and tap Next. To use a QR code, tap Register with QR code. The QR code reader starts. Scan the QR code shown in the device information in the BizMobile Go! admin console. |  |
| 17 | When the settings screen opens and shows Managed Unit: (your unit name), the Device Owner mode setup and device enrollment are complete. You can check whether the device is set to Device Owner under Management Type: Device Owner. After enrollment is complete, the screen is no longer locked, and you can switch screens as usual. |  |
Depending on the network conditions of the device setup environment, it may take some time for all the profiles, apps, and other items registered in the template to be installed on the device.
Wait at least 5 minutes after enrollment is complete before signing in to the device with a Google Workspace account.
(If you are configuring EMM with a Google Workspace account, you must sign in to the device after the first EMM sync following enrollment is complete.)