Enroll Using Per-Device Authentication
Device Owner mode is a setting that allows broader management of a device.
For a list of features that can be configured in Device Owner mode, see (Android) Types and Details of Profile Settings.
Device Owner mode must be set manually on a factory-reset device before it is registered (enrolled) in BizMobile Go!.
If the message BizGo!MDM requires an update to Google Play services. appears on the device, update Google Play services on the device.
Deploy Using Per-Device Authentication
This procedure registers (enrolls) a device by authenticating with individual device information prepared in advance.
For device registration, choose one of methods a through d below.
The recommended order is a to d, but the methods you can use may be limited depending on what the device you are setting to Device Owner mode supports.
a. Set Device Owner Mode and Enroll Using an Individual QR Code
This procedure sets Device Owner mode and enrolls the device by using a QR code, on devices running Android 10.0 or later.
b. Set Device Owner Mode and Enroll Using a BizMobile ID
This procedure sets Device Owner mode and enrolls the device by using a BizMobile ID, on devices running Android 6.0 or later.
Try this if method a is not available on the device.
c. Set Device Owner Mode and Enroll Using NFC
This procedure sets Device Owner mode and enrolls the device by using NFC, on devices running Android 5.0 or later.
Try this if methods a and b are not available on the device.
d. Set Device Owner Mode and Enroll Using the Android Debug Bridge (ADB) Developer Tool
This procedure sets Device Owner mode and enrolls the device by using Android Debug Bridge.
Try this if methods a, b, and c are not available on the device.