NFC High Security Add-on

info

This feature is an additional option for Geofence v2.
It cannot be used on its own and requires a Geofence v2 contract.
Supported OS versions are iOS / iPadOS 13.1 or later and Android 10.0 or later.
It can be used only on devices that support reading NFC tags while the app is not running. For iOS, this means iPhone XS or later. For Android, support varies by model, so check your device.

With the NFC High Security Add-on, you can set a geofence as a "normal area" or a "secure area".
In a secure area, scanning an NFC tag or card is required to exit the geofence, so unintended Exit events caused by GPS inaccuracy are not detected.

warning

The settings on the NFC tag or card side differ depending on the NFC you use. Contact us for details.

Entry and exit detection triggers by area setting

	Enter	Exit
Normal area	Location only	Location only
Secure area	Location or NFC	NFC only

How to use the add-on

If you are using the NFC High Security Add-on, see this page together with the usual instructions for using the BizGo! Air app.

iOS / iPadOS

• Enter / Exit operations with an NFC tag

Android

• Enter / Exit operations with an NFC tag