Android Deployment Flow with Per-Device Authentication (Work Profile)

This page explains how to deploy devices using per-device authentication. It is intended for people who are new to BizMobile Go!, are about to start preparing devices for deployment, or are taking over management of devices already in operation.

Work Profile is a management mode used mainly for BYOD devices.

A work area, separate from the personal area, is created on the device so that it can be used safely for business.

With this method, you prepare the device and user information in BizMobile Go! in advance. Each device is then enrolled in MDM (checked in) using the method you prepared for it, such as a QR code, a key/code, or a check-in email.

This page describes the basic steps common to device management, followed by the deployment steps for per-device authentication, in order. You can also read only the steps you need.

Use this page to find the steps required for your use case.

Task and link to the manual		Where to work			Frequency
		BizMobile Go! admin console	Google Play site	Managed device	First time	As needed
1. Prepare	1) Configure Android EMM		Yes		Yes
	2) Configure device integrity alarms	Yes			Yes
2. Set up management groups	3) Create a template	Yes			Yes	Yes*1
3. Set up content distribution	4) Register apps (Google Play Store)	Yes			Yes	Yes*1
	5) Register apps (in-house)	Yes			Yes	Yes*1
	6) Register profiles	Yes			Yes	Yes*1
4. Create device information	7) Create management information for the devices to enroll	Yes			Yes	Yes*2
5. Create user information	8) Create user information linked to the devices to enroll	Yes			Yes	Yes*2
6. Enroll devices	9) Check in the devices to enroll them			Yes	Yes	Yes*2

\*1 When adding or changing a management group

*2 When adding devices